Installation guide

Configuring network services and routing protocols 21-9
Chapter 21: Advanced Data Networking Configuration
Wave Global Administrator Guide
4 Select a network interface from the Network Interface drop-down list.
Setting up each network interface as a WINS client is recommended.
5 Enter the appropriate server address in the
Windows Internet Name Services (WINS) field,
and click Add.
Wave registers its name and IP address with the primary WINS server.
6 Select the
Enable DNS for Windows Resolution checkbox if the Wave Server will also be a
DNS client. This option ensures that DNS servers are also used to resolve client requests.
Note: When DNS is enabled here, you also need to enter DNS server information on the
DNS tab of the IP Network Settings applet.
7 Repeat steps 4 through 6 to configure each interface.
8 Click
Apply to confirm your changes. Changes take effect after your Wave Server is
rebooted.
Configuring DHCP relays
Note: Before starting this procedure, ensure you have the IP address of your DHCP server.
Release 2.0
September 2010