Installation guide

Configuring network services and routing protocols 21-3
Chapter 21: Advanced Data Networking Configuration
Wave Global Administrator Guide
Configuring network services and routing protocols
The following sections describe how to configure network services and routing protocols on the
Wave Server.
• “Configuring network routing protocols” on page 21-3
• “Configuring the Wave Server as a network services client” on page 21-6
• “Configuring DHCP relays” on page 21-9
• “Setting up static routes” on page 21-10
Configuring network routing protocols
By default, the routing protocols described in the following topics are installed but not
configured on the Wave Server, as they are not typically required for most configurations.
• “Configuring routing information protocol (RIP)” on page 21-3
• “Configuring the open shortest path first (OSPF) routing protocol” on page 21-5
Configuring routing information protocol (RIP)
Hint: If you are using RIP with multiple connection lines and want line speed taken into account
during routing, modify routing protocol metrics accordingly when configuring an interface or
when adding a static route.
Note: Unlike making network settings changes, when using RRAS, your changes will take
effect immediately; the Wave Server will not restart.
Release 2.0
September 2010