Installation guide

Setting trunk timing values 17-5
Chapter 17: Advanced Trunk and Channel Configuration
Wave Global Administrator Guide
9 Click OK to return to the Advanced Trunk Settings dialog.
10 Modify the device timers settings, if appropriate, by typing new values in the text boxes.
The value ranges and maximum number of digits allowed for these settings are:
•
LOS Frame Alignment. Default=15000; Range=1000-30000
•
Carrier Failure Alarm Clear Interval. Default=10000; Range=1000-15000
•
RAI Alarm Clear Interval. Default=1000; Range=500-10000
11 Click
Apply to save your changes.
12 Click
Done to return to the Management Console.
Setting trunk timing values
Trunk timing values are classified as either inbound or outbound, depending on the direction of
the call to which the timer applies.
Caution: These are expert settings that should not be modified unless you are
instructed to do so by your Vertical Technical Support representative.
• See “Setting digital trunk timing values” on page 17-6
• “Setting analog trunk timing values” on page 17-9
Release 2.0
September 2010