Installation guide

Configuring System Speed Dial 16-35
Chapter 16: PBX Feature Configuration
Wave Global Administrator Guide
Overriding access profiles when using System Speed Dial
By default, Wave does not override an access profile assigned to a line appearance if its
extension does not have permission in its access profile to dial long distance numbers. For
example, if an extension’s phone line appearances have Local Only access profiles assigned to
them, a user at that extension cannot use any system speed dial numbers that correspond to long
distance phone numbers.
If you want users with restrictive access profiles to be able to use system speed dial numbers
that require a higher level access profile, you must override the user’s access profile in the
System Speed Dial applet.
To override user access profiles when using System Speed Dial
1 If necessary, click the Administration tab of the Management Console.
2 Click the System Speed Dial icon, located in the PBX Administration section.
3 Select the
Override Caller’s Access Profile checkbox to override a line appearance access
profile with the specified access profile when a user dials any system speed dial number on
a Wave extension. Select the access profile to use from the drop-down list.
Note: Access profiles for line appearances are configured in the Outbound Routing applet;
see “Configuring specific access profiles” on page 9-14.
4 Click
Apply to save your change.
5 Click
Done to return to the Management Console.
Click
Release 2.0
September 2010