Installation guide

Configuring System Speed Dial 16-31
Chapter 16: PBX Feature Configuration
Wave Global Administrator Guide
6 If you want to configure digital phones with a Night Answer button, change the
configuration of the those phones in the User Configuration (Templates) applet.
Configuring System Speed Dial
Use the System Speed Dial applet to assign 1-3 digit speed dial numbers to phone numbers that
your organization uses frequently.
System speed dial numbers can be used on analog and digital phones. Refer to the Wave Phone
User Guide for information about using system speed dial numbers from the phone.
See the following sections for more about the System Speed Dial feature:
• Adding speed dial numbers. See page 16-31.
• Setting the System Speed Dial password. See page 16-33.
• Adding speed dial numbers using the phone. See page 16-33.
Adding speed dial numbers
To add speed dial numbers in the System Speed Dial applet
1 If necessary, click the Administration tab of the Management Console.
2 Click the System Speed Dial icon, located in the PBX Administration section.
Click
Release 2.0
September 2010