Installation guide

Configuring Music On Hold 16-22
Chapter 16: PBX Feature Configuration
Wave Global Administrator Guide
IP Music on Hold resources will be reallocated automatically if necessary if the following are
both true before upgrading:
• You have configured a system port for music on hold (via the Wave Player folder in the
Resource Management applet.)
• SIP is enabled on the Wave Server (via the Signaling Protocols folder in the IP Telephony
applet.)
Wave will try to allocate Standard Bit Rate (G.711) Music On Hold resources as needed. In
addition, if G.729AB is selected for codec negotiation for bandwidth management, Wave will
try to allocate Low Bit Rate (G.729A/G.711) Music On Hold resources, as in the following
example:
See “Configuring bandwidth management zones” on page 6-28 for more information.
Release 2.0
September 2010