Installation guide

Configuring Music On Hold 16-19
Chapter 16: PBX Feature Configuration
Wave Global Administrator Guide
4 To play hold music to calls on SIP phones or SIP trunks, select the Support IP Music On
Hold
checkbox.
Important: If you see the following message, you need to exit the General Settings applet,
allocate additional Music on Hold resources (either Low Bit Rate (G.729A/G.711) or
Standard Bit Rate (G.711) resources) via the Resource Management applet, and then restart
the General Settings applet.
5 Click
Configure Audio Sources to open the Music On Hold Audio Sources dialog:.
Release 2.0
September 2010