Installation guide

Configuring external call routing restrictions 16-14
Chapter 16: PBX Feature Configuration
Wave Global Administrator Guide
To turn this default option off so that no external access code is required
1 In the General Settings applet, click the PBX (Advanced) tab.
2 Deselect the
Require external access code to dial emergency numbers check box. Users
can now dial an emergency number directly.
You use the Outbound Routing applet to set up one or more emergency numbers. For details,
see “Setting up emergency dialing” on page 9-43.
Configuring external call routing restrictions
Any time a call comes in to the Wave Server and is routed back out on another trunk
(trunk-to-trunk), you must consider these external call routing restriction options. In this
scenario a call is physically connected across two external trunks through the Wave Server.
Scenarios include off-site call forwarding, off-site transferring, and conferencing where two or
more parties is an external phone number. These options can also affect your inbound call
routing wherever you have an inbound call routed to an external destination.
You can configure the following options in the General Setting applet, PBX (Advanced) tab, in
the Trunking group box:
•
Off-Site Call Forward Password Required. Select this check box to require users to enter
their voicemail passwords after specifying the external number when they forward their
calls to an external phone number. (This option does not apply if a user is forwarding
their phone to a Private Networking destination.)
Click
Release 2.0
September 2010