Installation guide

Configuring Caller ID 16-12
Chapter 16: PBX Feature Configuration
Wave Global Administrator Guide
• Send Company Name and Main Number. Sends the Company Name and Company
Main Number as external Caller ID.
Use this setting to provide some Caller ID information while keeping the actual
calling extension number private.
•
Send Station Name and this Number. Sends the Station Name (specified via the
User/Group Management applet) followed by the digits entered in the adjacent field.
If the check box is selected, the specified number of digits from the calling extension
number are appended to the digits specified in the field.
For example, if you enter 4085227, and specify that the last 3 digits be added to the
number, a call from extension 1234 will send the number 408-522-7234.
Use this setting to provide the station name and phone number on outbound calls.
•
Do Not Send Caller ID. Wave will not provide external Caller ID.
•
Send Organization Name. This option is not supported in this version.
Configuring user-specific Caller ID settings
By default all users send the external Caller ID format specified in the General Settings applet.
To override the system-wide Caller ID settings for a specific user, see “The User \ External
Caller ID tab” on page 11-21.
Release 2.0
September 2010