Installation guide

Configuring authorization codes 16-3
Chapter 16: PBX Feature Configuration
Wave Global Administrator Guide
3 Click New to open the Authorization Code dialog.
The Authorization Code field is automatically populated with a randomly selected unused
5-digit number. You may change this number to any 3- to 12-digit number.
4 Enter a
Description.
5 Choose an Access Profile from the drop-down list.
The Access Profile determines what types of calls can be made on an Wave extension using
this authorization code. The default is
Unrestricted access.
6 Click
OK to add the Authorization Code to the list.
7 Check the
Enable Authorization Codes check box.
Authorization codes cannot be used until the Enable Authorization Codes check box is
checked. When you are ready to enable authorization codes, check the Enable
Authorization Codes check box.
8 Click
Apply to save your changes.
9 Click
Done to return to the Management Console.
Release 2.0
September 2010