Installation guide

Configuring the trunk group for the auto attendant extension 13-25
Chapter 13: Configuring Auto Attendants
Wave Global Administrator Guide
Configuring the trunk group for the auto attendant extension
After creating auto attendants, or even if you are using only the default auto attendant, you must
configure the Trunk Group to correctly route the auto attendant extension.
To configure the trunk group for an auto attendant
1 If necessary, click the Administration tab of the Management Console.
2 Click the Trunk Groups icon, located in the Trunk Administration section. The Trunk
Groups dialog opens.
3 Select
Voice Analog, and click Edit. The Trunk Group dialog opens with the In tab
showing.
Click
Release 2.0
September 2010