Installation guide

The Phone \ Ring Patterns tab 11-71
Chapter 11: Managing Users and Roles
Wave Global Administrator Guide
5 All of the feature button assignments for this DSS console are listed in the bottom pane. To
assign a feature to an unassigned button, click in the
Features column for that button, and
then select the feature from the drop-down list.
6 Some features have additional settings. Click in the
Parameter column for the button, and
then click the “...” button if one is available. Specify the required and optional settings as
needed in the dialog that opens.
7 Click
OK until you return to the DSS Consoles tab.
The Phone \ Ring Patterns tab
You use this tab to configure different ring tones for internal and external calls.
To configure ring patterns
1 In the User/Group Management applet, in the Users view create a new user or double-click
an existing user to edit the user.
2 Click the Phone \ Ring Patterns tab.
3 Select a ring pattern (
Single, Double, or Triple) for Internal calls from the drop-down list.
4 Do the same for
External calls.
Release 2.0
September 2010