Installation guide

The Phone \ DSS Consoles tab 11-69
Chapter 11: Managing Users and Roles
Wave Global Administrator Guide
Important: If you change the user’s Telephone type via the User tab while one or more DSS
consoles are connected to that extension, a message warns you if DSS consoles are not
supported on the new phone type, or if the number of DSS consoles already configured for this
user will be over the limit supported on the new phone type. Also, the DSS console button
configurations for those DSS Consoles will be deleted, and you will have to redefine all of the
buttons, as described below. This limitation will be addressed in a future version.
For instructions on how to connect a DSS Console on the Wave Server, see Chapter 4 in the
Wave Server Installation Guide.
DSS consoles and extensions are included in some of the reports available via the Report
Generator applet.
•
Station Ports report. DSS console extensions are listed in the Primary Extension
column using the format “<Extension> DSS <n>”, for example “105 DSS 1”.
•
Phone Button report.
DSS console extensions are also listed in the Station Ports applet. However, they are not listed
in the Station Monitor applet, which only lists the user’s primary extension.
To add a DSS console to a user’s digital phone configuration
1 In the User/Group Management applet, in the Users view create a new user or double-click
an existing user to edit the user.
2 Click the Phone \ DSS Consoles tab.
Release 2.0
September 2010