Installation guide

The Phone \ Station Features tab 11-66
Chapter 11: Managing Users and Roles
Wave Global Administrator Guide
To assign or change a feature assigned to a feature button
1 In the User/Group Management applet, in the Users view create a new user or double-click
an existing user to edit the user.
2 Click the Phone \ Station Features tab.
3 Click in the
Feature column for the button, and then click the arrow icon that appears.
4 Select the feature to assign from the drop-down list.
Note: You must first create a trunk group with outside lines enabled (via the Trunks Group
applet) before the Outside Line option will be presented in the list of features that can be
configured for a digital phone.
5 Some features have additional settings. Click in the
Parameter column for the button, and
then click the “...” icon if one appears.
6 Specify the required and optional settings as needed in the dialog that opens.
7 Click
OK to save your changes.
8 Drag the slider bar to adjust the
Ring volume of the phone.
9 Select the
Use voice-first answering checkbox to enables voice-first answering. With
voice-first answering, internal calls are connected to the user’s speakerphone automatically
without the phone ringing or needing to be picked up. All external calls ring the phone as
normal.
Release 2.0
September 2010