Installation guide

The Phone tab 11-56
Chapter 11: Managing Users and Roles
Wave Global Administrator Guide
Supplying a SIP authentication password
This section only applies to SIP phone users.
Note: See “Setting up SIP endpoint authentication” on page 6-5 for other configuration steps
you must complete in order to perform SIP authentication with Wave.
SIP authentication passwords are different from regular Wave passwords, and are not affected
by the password settings described in “Enforcing strong password security” on page 4-13.
To supply a SIP authentication password for a user
1 In the User/Group Management applet, in the Users view create a new user or double-click
an existing user to edit the user.
2 On the Phone tab in the SIP Authentication Settings section, the user’s
SIP authentication
username
is assigned automatically and cannot be changed. SIP authentication username
consists of the user’s last name plus extension.
3 Enter the user’s
SIP authentication password, and then re-enter it in the Confirmation field.
This password can be a maximum of 48 characters, and can include alphanumeric
characters, spaces, and special characters. A blank password is allowed.
Using mobile extensions and imitating a station on externally routed calls
A Wave mobile extension allows a user’s remote phone to be treated as a Wave station. (A
remote phone is any phone that is external to the Wave system, for example a cell phone, home
phone, or legacy PBX phone.)
Release 2.0
September 2010