Installation guide

The User tab 11-15
Chapter 11: Managing Users and Roles
Wave Global Administrator Guide
Assigning a user from a digital phone
You can also assign a digital phone to a user automatically when you connect the phone.
To assign a user from a digital phone
1 Create the user as described in “The User tab” on page 11-12. Be sure to specify the
following:
•Set
Slot:port to No slot selected and No port selected.
• Select the digital phone model number of the phone to be assigned to this user from
the
Telephone type drop-down list.
2 Connect the phone to a digital phone port on the Wave Server.
3 If the phone was previously set up and plugged into a different port, the phone will display
Previous <Ext> Keep?.
• If you are moving the phone but still want to keep it assigned to the same user, select
Yes. Go to step 5.
• To assign the phone to a different user, select
No.
4 Press
BEGIN. The phone displays a list of users who do not yet have a phone assigned, and
whose
Telephone type field matches the phone’s. Scroll through the list and select the user
to assign to the phone.
5 Press
Select to choose the user to assign to the phone.
6 Press
Yes to confirm the new phone assignment.
Release 2.0
September 2010