Installation guide

The Users view 11-4
Chapter 11: Managing Users and Roles
Wave Global Administrator Guide
Increasing the number of digital phone users on a Wave IP 500 Server
The Wave IP 500 requires an external power supply to provide power to digital phones. When
you ordered your Wave IP 500, the appropriate model external power supply was included,
based on the number of digital phones you planned to support.
• The 120W external power supply supports up to 24 digital phones.
• The 180W external power supply supports up to 48 digital phones.
If you add digital phone users to your Wave Server at a later time, you may need to upgrade the
external power supply to avoid any problems. Contact your Wave provider for more
information.
Note: In a worst-case scenario—a very heavily-used system with all phones in constant use at
full power (all LEDs on, speaker phones on full volume, and so forth), the external power supply
could shut down and all digital phones could stop working.
The Users view
You add, edit and delete users in the Users view. To open the Users view:
1 If necessary, click the Administration tab of the Management Console.
2 Click the User/Group Management icon, located in the PBX Administration section of the
Management Console.
3 Log on to the User/Group Management applet, which opens in a remote access window.
Once you log on, the Users view opens. See “Accessing the User/Group Management
applet” on page 2-14 for more about logging on to the User/Group Management applet.
Click
Release 2.0
September 2010