Installation guide

Enabling and disabling station ports 10-49
Chapter 10: Configuring Phones
Wave Global Administrator Guide
4 Select a card or module and then use the Enable and Disable buttons to enable or disable all
of he station ports on that card or module. To enable or disable individual ports, expand the
card or module first.
The following information is displayed for each station port:
• Status (Enabled or Disabled)
• Primary Extension. Primary extension associated with the port.
•
User. User associated with the port’s extension.
•
Template. Phone template associated with the port’s extension.
5 Click
Done to return to the Management Console.
Release 2.0
September 2010