Installation guide

Enabling and disabling station ports 10-48
Chapter 10: Configuring Phones
Wave Global Administrator Guide
7 Select the extensions you want to add as members of the hunt group.
Use Ctrl-click or Shift-click to select multiple extensions. A maximum of 64 extensions
can be in a single hunt group.
8 Click
OK. The Add Hunt Group Members dialog closes.
9 Click an extension and use the
Up and Down buttons to rearrange the order of the
extensions in the hunt group.
10 Click
OK to close the Station Hunt Group dialog, and return to the Management Console.
Enabling and disabling station ports
The Station Ports applet lets you enable and disable all of the station ports on a card or module,
or individual ports.
To enable or disable station ports
1 If necessary, click the Administration tab of the Management Console.
2 Click the Station Ports icon, located in the PBX Administration section.
3 The Station Ports applet opens and displays the cards and modules currently installed in the
Wave Server that provide station ports and the status of each one (enabled or disabled).
Click
Release 2.0
September 2010