Installation guide

Configuring hunt groups of extensions 10-45
Chapter 10: Configuring Phones
Wave Global Administrator Guide
Creating a station hunt group
To create a new station hunt group
1 If necessary, click the Administration tab of the Management Console.
2 Click the Hunt Groups icon, located in the PBX Administration section.
3 Click
New in the Station tab of the Hunt Groups applet. The Station Hunt Group dialog
opens.
4 Enter a unique
Pilot number for the hunt group. A pilot number is the number users dial, or
trunk groups use, to reach the members of a hunt group.
The pilot number is similar to an extension:
• It must be unique
• It must fit into your first digit dialing plan for internal numbers
• It must comply with the Internal extension length setting in the First Digit Table
Click
Release 2.0
September 2010