Installation guide

Configuring digital and SIP phone feature buttons 10-35
Chapter 10: Configuring Phones
Wave Global Administrator Guide
• Preview. If checked, displays a list of all available speed dial index numbers when the
button is pressed.
•If
Preview is selected and Speed Dial Index is not blank, the number about to be
dialed is displayed on the phone. The user can press the button again to dial the
number, or scroll through the list of numbers using the volume up and down buttons
in order to select a different number (by pressing the button again.)
•If
Preview is selected and Speed Dial Index is blank, the list of all available speed
dial index numbers is displayed, starting with the last number viewed. The user can
scroll through the list of numbers using the volume up and down buttons in order to
select a different number (by pressing the button again.)
If
Preview is not selected, the associated Speed Dial Index number is automatically dialed
when the button is pressed. If
Speed Dial Index is blank, the user is prompted to enter a
specific speed dial index number which is then dialed.
System Park feature
Places a call in one of 10 parking slots for retrieval from another phone. You can include one
System Park button per phone.
Phone type: Digital, SIP.
Required settings: None.
Optional settings: None.
Important notes:
• In the General Setting applet, PBX (Advanced) tab, in the Call Park group box, you can
specify the
System park n minutes before ring back setting. In the System Park
drop-down list,
n is the number of minutes that Wave waits for a user to pick up a parked
call. If the call is not picked up within the specified time, Wave rings the extension from
which the call was parked. If you specify unlimited minutes, Wave does not ring back the
parking extension.
Release 2.0
September 2010