Installation guide

Configuring digital and SIP phone feature buttons 10-27
Chapter 10: Configuring Phones
Wave Global Administrator Guide
Optional settings:
•
Do not ring the telephone. If checked, disables ringing when a call is received on this line
appearance. If checked, this setting also disables the
Receive splash ring when off hook
setting (described below) if it is checked.
•
Receive call waiting tone when off hook. If checked, a beep sounds if the user is off hook
and another call arrives on the line. A beep also sounds if an incoming call hangs up or is
forwarded before answering.
•
Always select first. If checked, automatically selects the primary line first when
answering a ringing line or going off-hook, regardless of where the Primary button
appears on the phone.
•
Receive splash ring when off hook. If checked, one short ring blip sounds when another
call comes in while the user is off hook. Even if checked, this setting may be disabled if
Do not ring the telephone (described above) is checked.
•
Mute the microphone when voice calls are received. If checked, prevents the calling
party from hearing you when a voice call is placed to this extension number.
•
Off-hook audible alert. If checked, produces an alert tone when a call comes in on this
line appearance if the phone is engaged in an off-hook activity.
•
Do not receive system paging. If checked, prevents this phone from receiving pages
broadcast to the entire system with the Page button. Note that this option does not prevent
the phone from receiving a zone-specific (non-system) page.
•
Do not allow break-in. If checked, prevents the line appearance from joining an active call
when the shared extension is being used by another call.
•
Disable paging alert tone. If checked, disables the paging alert tone on this phone, but
allows the phone to receive the page.
•
Auto Privacy. If checked, all calls answered or placed via this button are private. A
private call cannot be broken into by another user’s secondary line appearance even if the
secondary line appearance is configured to allow break-in. Also, if you put a private call
on hold, only the phone used to put the call on hold can retrieve the call.
Release 2.0
September 2010