Installation guide

Configuring digital and SIP phone feature buttons 10-26
Chapter 10: Configuring Phones
Wave Global Administrator Guide
• Automatic Line Selection. If checked, applies Automatic Line Selection behavior. This
setting allows an outside line to be selected for making calls automatically when an
external access digit is dialed, or for answering calls automatically when the phone goes
off-hook.
See “Automatic Line Selection” on page 29-28 for a description of Automatic Line
Selection behavior on Outside Line buttons.
•
Do not ring the telephone. If checked, ringing is disabled when a call is received on this
line, similar to setting Do Not Disturb for this outside line. When a call comes in, the
phone will not ring, but the LED will flash.
Page feature
Accesses the public address system and all the digital phone speakers on your system. Pages can
be sent to the entire system or only to specific zones. You can include multiple Page buttons on
a phone. See “Configuring zone paging groups” on page 16-37 for information about
configuring zone paging groups.
Phone type: Digital, SIP.
Required settings:
•
Zone Paging Group. Select a paging zone (for example, 01 - Sales), or select System
Page
to page the entire system.
Optional settings: None.
Primary feature
Primary line appearance. This is the main extension number associated with this phone. You can
include only one Primary button per phone.
Phone type: Digital, SIP.
Required settings:
•
Extension. Any valid extension number.
Release 2.0
September 2010