Installation guide

Configuring digital and SIP phone feature buttons 10-25
Chapter 10: Configuring Phones
Wave Global Administrator Guide
Night Answer feature
Places the phone into a mode where inbound calls are redirected to predetermined destination.
You can configure any on- or off-premise phone number as the destination. See “Configuring
Night Answer” on page 16-29 for information about configuring the Night Answer system.
Phone type: Digital.
Required settings: None.
Optional settings: None.
Outside Line feature
A button used for receiving and placing calls on a specific trunk or set of trunks. This allows
users to make external calls without having to dial an access code (typically
9). See “About
creating outside lines” on page 5-2 for more information. You can include multiple Outside Line
buttons on a phone.
Note: You must first create a trunk group with outside lines enabled (via the Trunks Group
applet) before the Outside Line option will be presented in the list of features that can be
configured for a digital phone.
Phone type: Digital.
Required settings:
•
Outside Line. Any trunk group with outside lines enabled via the Trunk Groups applet.
Optional settings:
•
Do not allow break-in. If checked, denies break-in on any calls on this Outside Line
button. This does not affect instances of the outside line on other phones. This setting
applies only to Single Call variant outside lines only.
•
Off-hook audible alert. If checked, an audible tone alerts the user when a call comes in on
this line appearance and the phone is off-hook.
Release 2.0
September 2010