Installation guide

Configuring digital and SIP phone feature buttons 10-22
Chapter 10: Configuring Phones
Wave Global Administrator Guide
• Off-hook audible alert. If checked, either rings the phone or produces an alert tone
(depending on the phone type) when a call comes in on this line appearance if the phone
is engaged in an off-hook activity.
•
Receive splash ring when off hook. If checked, one short ring blip sounds when another
call comes in while the user is off hook. Even if checked, this setting may be disabled if
Do not ring the telephone (described above) is checked.
•
Use Primary Access Profile. If checked, applies the access profile configured for the
Primary extension number associated with this phone in the User Configuration applet,
Overview tab.
•
Use Primary Caller ID. If checked, applies the External Caller ID rules configured for the
Primary extension number associated with this phone in the User Configuration applet,
Overview tab.
•
Do not allow break-in. If checked, prevents the line appearance from joining an active call
when the shared extension is being used by another call.
•
Automatic Line Selection. If checked, applies Automatic Line Selection behavior. See
“Automatic Line Selection” on page 29-28 for a description of Automatic Line Selection
behavior on Line Appearance buttons.
•
Call Navigator Pickup Group 1-6. Only used if you are using the Wave Call Navigator
software add-on in association with the Queue Status feature. This allows this line
appearance to be used for answering calls on a specific Call Navigator queue.
When there is a waiting call in that queue, pressing the Queue Status button automatically
connects the call on this line appearance, if it is available. If this line appearance is not
available, the queue call is automatically connected on the primary or other available line
appearance on this phone that is also associated with the same Call Navigator Pickup
Group. (You do not need to press the associated Primary or Line Appearance button to take
the call.)
Note that a Call Navigator Pickup Group is only used here to associate this Line
Appearance button with a Queue Status button. A Call Navigator Pickup Group is not the
same as a Wave Pickup Group, and you do not need to create a Wave Pickup Group (as
described in “Configuring call pickup groups” on page 16-5) by that name.
Release 2.0
September 2010