Installation guide

Configuring digital and SIP phone feature buttons 10-15
Chapter 10: Configuring Phones
Wave Global Administrator Guide
If either of these configurations are detected when you are editing a user or applying a
digital or SIP phone template, Wave displays an error message and does not allow the
button to be configured or the template to be applied.
Note: Previous versions of Wave allowed these feature button configurations, and users with the
unsupported configurations may still exist in your Wave database. If you are editing one of these
users, the unsupported configuration will now prevent the user from being saved even if you made
no changes to feature button assignments. If this problem occurs, either remove the Line
Appearance button, or remove the Call Appearance button from the primary phone of the
extension to which you want to map the Line Appearance button.
Call Record feature
Records the current call and saves the recording as a voicemail message. You can include one
Call Record button per phone.
Phone type: Digital.
Required settings: None.
Optional settings:
•
Mailbox. Extension where call recordings will be saved as voicemail messages.
Warning: In some localities, it is illegal to record a phone call without first notifying the
person who is being recorded.
Call Return feature
Calls back the extension from which the last inbound call on the primary line appearance came,
if the call originated on the local Wave system. You can include one Call Return button per
phone.
Phone type: Digital.
Required settings: None.
Optional settings: None.
Release 2.0
September 2010