Installation guide

About phone templates 10-9
Chapter 10: Configuring Phones
Wave Global Administrator Guide
6 Click the text on a feature button in the graphic to change the feature assigned to that
button. The Feature Button Configuration dialog opens.
7 Select the feature to assign from the
Feature drop-down list. Some features have additional
settings such as
Do not ring the telephone, Do not allow break-in, and so forth.
Hint: Right-click a button description on the phone template to open a shortcut menu with
the features available for the button. If you select a feature that requires additional
information, the Feature Button Configuration dialog opens.
See “Configuring digital and SIP phone feature buttons” on page 10-10 for information
about default, required, and optional settings for each of the programmable features.
8 Click
OK to finish configuring the feature button and close the Feature Button
Configuration dialog.
9 Click
OK to close the graphical representation of the phone.
10 Click
Apply to save your changes.
11 Click
Done to return to the Management Console.
Release 2.0
September 2010