Installation guide

About phone templates 10-6
Chapter 10: Configuring Phones
Wave Global Administrator Guide
4 Select the device for which this template will be used:
•
Station. Analog phone used for making and receiving voice communications.
•
External Voicemail/External Fax Server. Analog connection for an external voicemail
system or external fax server. If you select this option, go to step 7.
5 Select a
Phone Type from the drop-down list.
•
Basic. Select this option if this phone cannot display Caller ID, or if Caller ID is not
supplied by your phone service provider.
•
Caller ID. Select this option if this phone type can display Caller ID on inbound calls
when the phone is idle.
•
Enhanced CW. Select this option if this phone type can display Caller ID on inbound
calls when the phone is idle and also on call waiting calls.
6 Select a
Message Waiting Indicator from the drop-down list.
•
Lamp. Select this option if this phone has a lamp that lights when new messages
arrive in the user’s voice mailbox.
•
Stutter. Select this option if this phone provides a stutter dial tone when new
messages arrive in the user’s voice mailbox.
7 Click
Done to save your changes, and return to the Management Console.
Customizing digital and SIP phone templates
Wave includes one or more default phone templates for each supported digital and SIP phone
model. You can customize these defaults as follows:
• Each supported digital phone model has one or more templates that include
pre-configured feature buttons (for example, Basic, Operator, Multiple Call Appearance,
and so forth) that you can customize further for different types of digital phone users, or
you can create new templates.
• Each supported SIP phone model has a default template that you can use to create new,
customized templates.
Release 2.0
September 2010