Installation guide

About phone templates 10-4
Chapter 10: Configuring Phones
Wave Global Administrator Guide
To create a new template
1 Select a template folder or template.
2 Click
Create Template.
3 Select the new template and rename it in the field in the right pane.
To copy an existing template
1 Select one of the templates.
2 Click
Copy Template to create a copy of the selected template.
A new template is displayed at the bottom of the template list.
3 Select the new template and rename it in the field in the right pane.
Customizing analog phone templates
If you use analog phones on your Wave system, there are seven default templates provided that
contain most combinations of analog phone Caller ID and message waiting indicator feature
options. There is a Fax modem template provided as well. Typically, you will not need to change
the templates, but you do need to select the correct one when you create a new user.
The default analog phone templates are:
•
Basic - Lamp. Use for phones with no Caller ID and a message waiting lamp.
•
Basic - Stutter. Use for phones with no Caller ID and no message waiting lamp.
•
Caller ID - Lamp. Use for phones with Caller ID and a message waiting lamp.
•
Caller ID - Stutter. Use for phones with Caller ID and no message waiting lamp.
•
Enhanced Call Waiting - Lamp. Use for phones with enhanced Caller ID and a message
waiting lamp.
•
Enhanced Call Waiting - Stutter. Use for phones with enhanced Caller ID and no message
waiting lamp.
Release 2.0
September 2010