Installation guide

Configuring destination access code routing 9-26
Chapter 9: Configuring Outbound Call Routing
Wave Global Administrator Guide
Creating destination access codes
Perform the following steps to create destination access codes in the First Digit Table applet.
To create destination access codes
1 If necessary, click the Administration tab of the Management Console.
2 Click the First Digit Table icon, located in the PBX Administration section.
3 Click the button with the number that you want to configure.
4 Choose
External from the Digit Type drop-down list.
The external digit configuration options appear in the Additional Settings group box.
Click
Release 2.0
September 2010