Installation guide

Configuring off-premise extension routing 9-23
Chapter 9: Configuring Outbound Call Routing
Wave Global Administrator Guide
Creating off-premise extension ranges
Use the procedure “Configuring extension ranges” on page 7-3 to create your off-premise
extension ranges if you want to use numbers that begin with a different first digit than those you
are using for your local extensions.
For example, if you are using 100-150 for your local extensions and you want to use 159-199
for your off-premise extensions you do not need to configure an additional extension digit in the
First Digit Table. Continue with “Configuring the off-premise extension table” on page 9-23.
Configuring the off-premise extension table
1 If necessary, click the Administration tab of the Management Console.
2 Click the Outbound Routing icon, located in the Trunk Administration section.
3 The Outbound Routing dialog opens:
4 Click
Edit Global Access Profile to open the Global Access Profile dialog.
Click
Release 2.0
September 2010