Installation guide

Configuring automatic route selection 9-18
Chapter 9: Configuring Outbound Call Routing
Wave Global Administrator Guide
9 Click the Privileges tab.
The Privileges tab is where you can specify the routing table to which Wave will send calls,
depending on the call type. The call type is determined by the first digits entered in the
telephone number. You can send calls to different routing tables depending on the
following digit strings:
•
011 = International Routing Table
•
0 = Local Operator Routing Table
•
00 = Long Distance Operator Routing Table
•
Carrier Access Code Destination = A carrier access code is a code (seven digits,
beginning with 101) that you dial to access a long-distance carrier, for example
10-10-321.
Release 2.0
September 2010