Installation guide

Configuring automatic route selection 9-2
Chapter 9: Configuring Outbound Call Routing
Wave Global Administrator Guide
Configuring the external first digit
In this task you will configure an external first digit for outbound call routing by automatic route
selection.
To configure the external first digit
1 If necessary, click the Administration tab of the Management Console.
2 Click the First Digit Table icon, located in the PBX Administration section.
3 Select a
Digit (Type) button and set Digit Type to External.
The external digit configuration options appear in the Additional Settings
group box.
Click
Release 2.0
September 2010