Installation guide

Wave Global Administrator Guide
Chapter 9
9. Configuring Outbound Call Routing
CHAPTER CONTENTS
Outbound call routing determines how calls that originate within Wave Server and that
terminate at an external destination are handled.
See “Outbound call routing” on page 29-4 for background information on the types of outbound
call routing described in this chapter.
Configuring automatic route selection
This section provides information about configuring outbound call routing using automatic
route selection. See “Automatic route selection” on page 29-8 for examples and information
about why you might use automatic route selection.To set up your Wave Server for automatic
route selection, you need to complete the following tasks:
• Configuring the external first digit. See page 9-2.
• Configuring the Global Access Profile. See page 9-4.
• Configuring specific access profiles. See page 9-14.
• Configuring outbound routing tables. See page 9-20.
Configuring automatic route selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
Configuring off-premise extension routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-22
Configuring destination access code routing . . . . . . . . . . . . . . . . . . . . . . . . . . 9-25
Configuring private networking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-29
Changing an access code in a user’s saved numbers. . . . . . . . . . . . . . . . . . . 9-39
Setting default access codes for callbacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-40
Dialing phone numbers entered in the ViewPoint dial bar exactly as entered . 9-41
Setting up emergency dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-43
Release 2.0
September 2010