Installation guide

Configuring inbound routing tables 8-5
Chapter 8: Configuring Inbound Call Routing
Wave Global Administrator Guide
The Inbound Routing Table dialog opens.
4 Select one of the table options.
•
Route By Source or Dialed Number. Using this setting you can decide how calls on
this trunk group get routed based on the Caller ID (or ANI) sent with the call, or the
digits the caller dialed (DID, Lead Telephone Number, or DNIS).
•
Scheduled Routing. Use this format to set time and day restraints on the destination to
which inbound calls from the specified trunk are routed. This choice is ideal for
trunks that receive no digits and require no translation.
•
Both. This setting is ideal if calls to the main company number and all numbers are
sent to the same trunk group.
5 Click
Add to insert a new rule into the table.
If you are using Scheduled Routing:
a Uncheck the days of the week that you do not want this rule to affect.
b Select times in the
Start Time and End Time fields.
If you are using Route By Source or Dialed Number, click the appropriate table cells to
enter values in the following columns:
•
Call Source. No value required. May be any string of digits representing Caller ID or
ANI source number.
Release 2.0
September 2010