Installation guide

Configuring the VoiceMail extension 7-7
Chapter 7: Initial Call Routing Configuration
Wave Global Administrator Guide
Configuring the VoiceMail extension
The VoiceMail default extension (550) is adequate for most Wave configurations, If you want
to use a different extension number to access voicemail, perform the following steps.
To configure the VoiceMail extension
1 If necessary, click the Administration tab of the Management Console.
2 Click the User/Group Management icon, located in the PBX Administration section.
3 Click
File > New > Auto Attendant.
4 Enter the following information on the General tab:
•
Name. Required. Descriptive name for the new auto attendant, for example,
“VoiceMail”.
•
Extension. Required. Extension used to access VoiceMail.
5 Click
OK to close the Auto Attendant dialog.
Click
Release 2.0
September 2010