Installation guide

Configuring extension ranges 7-3
Chapter 7: Initial Call Routing Configuration
Wave Global Administrator Guide
Configuring extension ranges
In this task you will configure the digits extensions can begin with, and the number of digits in
extension numbers.
The default ranges for extensions are as follows:
• User extensions are 100-199 (first digit 1, length 3)
• System extensions are 500-599 (first digit 5, length 3)
For example, Wave Server modems are preconfigured to use extension 570.
Note: If you have already configured extensions, and you want to change the extension length,
you must first delete all the extensions, hunt groups, and voice mailboxes that begin with the
first digit in the range you want to modify.
To configure extension ranges
1 If necessary, click the Administration tab of the Management Console.
2 Click the First Digit Table icon, located in the PBX Administration section.
3 The First Digit Table applet starts.
Click
Release 2.0
September 2010