Installation guide

Wave Global Administrator Guide
Chapter 7
7. Initial Call Routing Configuration
CHAPTER CONTENTS
This chapter provides information about configuring initial call routing options and internal call
routing settings.
About the First Digit Table
First Digit Table settings are used to assign telephone dial pad numbers 0 to 9 to various call
types--including internal, external, off-premise, and attendant--based on the call destination.
The First Digit Table settings affect many other Wave settings for trunks, the PBX, extensions,
AutoAttendant, and Voice Mail.
The First Digit table is preconfigured with the most commonly-used settings—9 for an external
line, 0 for the company operator, and so forth. If the default first digit settings listed below are
satisfactory, you do not need to reconfigure the First Digit Table applet
Caution: Any changes you want to make to the first digit table defaults should be made
before trunk and PBX configuration.
About the First Digit Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
Configuring extension ranges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Setting the home area code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Configuring 10-digit dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Configuring the VoiceMail extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7
Release 2.0
September 2010