Installation guide

Adjusting IP call quality parameters 6-44
Chapter 6: IP Telephony Configuration
Wave Global Administrator Guide
4 Select the Generate Comfort Noise checkbox if you want the Wave Server to automatically
generate background noise.
5 Click
OK.
Gain
Caution: This is an expert setting that should not be modified unless you are instructed
to do so by your Vertical Technical Support representative.
The gain settings adjust the transmit gain and receive gain levels for the TDM segment of a call.
The following diagram shows transmit and receive gain:
To adjust the transmit and receive gain values
1 If necessary, click the Administration tab of the Management Console.
2 Click the IP Telephony icon, located in the PBX Administration section.
DSP
packets TDM voice signal
receive
transmit
receive
transmit
Click
Release 2.0
September 2010