Installation guide

Configuring bandwidth management zones 6-35
Chapter 6: IP Telephony Configuration
Wave Global Administrator Guide
8 Configure the intra-zone codecs.
a Select the Intra-Zone Codecs tab.
b Edit the default settings as explained in step 7b.
9 Click
OK to close the Bandwidth Management dialog.
10 Click
Apply to save the Home zone configuration.
Configuring remote zones
To configure remote zones
1 If necessary, click the Administration tab of the Management Console.
2 Click the IP Telephony icon, located in the PBX Administration section.
Click
Release 2.0
September 2010