Installation guide

Configuring bandwidth management zones 6-32
Chapter 6: IP Telephony Configuration
Wave Global Administrator Guide
5 Configure the IP address range.
Include all the applicable IP address ranges used by the IP phones on the local Wave
system. The Home Zone always includes the IP address of the Wave for bandwidth and call
control purposes, whether or not it is explicitly specified in the IP Telephony applet.
To add an IP address range:
a Select the IP Address Ranges tab.
b Select the IP address range and click
Edit to alter the existing range, or click New to
add a new IP address range.
You can also add single IP addresses.
Release 2.0
September 2010