Installation guide

Configuring SIP phones 6-27
Chapter 6: IP Telephony Configuration
Wave Global Administrator Guide
3 Enter the VAM IP address on the Wave Server. (The factory-default VAM IP address is
192.168.205.1.)
4 Press
Done (or Cancel). Continue pressing Done until you are asked to restart the phone,
and then confirm the phone restart. If you are not prompted to restart the phone, manually
restart the phone by pressing the Options menu and then selecting
Phone Status > Restart
Phone
.
Note: The phone may take several minutes to download required configuration files, and
restart automatically one or more times depending on which files are required.
Setting date and time on Vertical-branded SIP phones
This task is optional.
By default, after a SIP phone downloads the configuration file the date and time displayed on
the phone is set to the physical location of the Wave Server server. If the SIP phone is in a
different time zone than the Wave server, the phone's date and time may not match the user's
location. This section describes how to adjust the date and time displayed on the phone.
To set date and time
1 Press the Options button.
2 Scroll to
Date and Time and press Show.
3 Select
Time Server and press Show. Enter the IP address of the Wave Server, and then press
Done.
4 Select
Set Time and press Show. Enter the current time, and then press Done.
5 Select
Time Format and press Show. Select either 12h or 24h, and then press Done.
6 Select
Set Date and press Show. Enter current date, and then press Done.
7 Select
Date Format and press Show. Select the preferred date style, and then press Done.
8 Select
Time Zone and press Show. Select your time zone, and then press Done.
9 Select
Daylight Savings and press Show. Select the correct daylight savings time setting,
and then press
Done.
10 When the Date and Time settings are complete, press
Done.
Release 2.0
September 2010