Installation guide

Configuring SIP phones 6-23
Chapter 6: IP Telephony Configuration
Wave Global Administrator Guide
SIP phones require the ability to log into and download files from the Wave FTP or TFTP server.
Any network configurations that do not allow that connectivity will result in the SIP phones
being unable to initialize. These configuration areas include, but are not limited to, the
following:
• Incomplete routing
• External firewalls
• Internal firewalls, such as Check Point FireWall-1
• RRAS address / port filtering
• TFTP/FTP directory security
SIP phone configuration includes the following:
• Configuring SIP phone extensions
• Configuring Vertical-branded SIP phones
• Enabling IP call bandwidth
• Changing the password for the IPPhone user account
Configuring SIP phone extensions
This procedure assumes you are already familiar with configuring Wave phone extensions, and
only addresses configuration tasks specific to configuring SIP phone extensions.
To configure SIP phone extensions
1 If necessary, click the Administration tab of the Management Console.
2 Click the User/Group Management icon, located in the PBX Administration section. The
User/Group Management applet opens, with the Users view showing.
Click
Release 2.0
September 2010