Installation guide

Configuring site-to-site call routing for IP telephony 6-16
Chapter 6: IP Telephony Configuration
Wave Global Administrator Guide
13 Click Advanced Settings to view or change this SCP’s advanced settings. These settings
are primarily used to fine-tune interoperability with ITSPs.
14 If this SCP connects to an ITSP that requires that you configure an outbound proxy server,
select the
Enable Outbound Proxy checkbox and then enter the following information in
the Outbound Proxy Settings section.
•
Outbound Proxy Server
• Outbound Proxy Port
Release 2.0
September 2010