Installation guide

Allocating IP telephony resources 6-2
Chapter 6: IP Telephony Configuration
Wave Global Administrator Guide
To allocate IP telephony resources
1 If necessary, click the Administration tab of the Management Console.
2 Click the Resource Management icon, located in the PBX Administration section
3 Expand the IP Telephony Resources folder.
4 Expand the Voice Over IP Group folder, and select the
G.729A/G.711 codec.
5 Select the appropriate number of available IP telephony resources in the drop-down list (on
the right side of the applet).
6 Click
Apply to save your changes, and return to the Management Console.
Click
Release 2.0
September 2010