Installation guide

Wave Global Administrator Guide
Chapter 6
6IP Telephony Configuration
CHAPTER CONTENTS
This chapter describes how to configure the IP telephony features available on the Wave Server.
Allocating IP telephony resources
Note: You must have a SIP Trunk license added on the Wave Server before you can configure
SIP trunks. See Chapter 24 for instructions.
Before you configure your system for IP telephony, you must allocate Digital Signaling
Processor (DSP) resources that are required for each IP telephony port. For more information
about the DSP resources required for IP telephony, refer to “DSP resources and licensing for IP
telephony resources” on page 28-4.
Allocating IP telephony resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Configuring site-to-site call routing for IP telephony. . . . . . . . . . . . . . . . . . . . . . 6-3
Configuring SIP phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22
Configuring bandwidth management zones. . . . . . . . . . . . . . . . . . . . . . . . . . . 6-28
Adjusting IP call quality parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-39
IP telephony ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-49
Release 2.0
September 2010