Installation guide

Configuring digital trunks and channels 5-40
Chapter 5: Configuring Analog and Digital Trunks
Wave Global Administrator Guide
4 To enable incoming Caller ID on BRI trunks, click the Timers button. The ISDN Timers
dialog opens.
5 Select the
Wait for Caller ID checkbox.
Note: Do not change any of the other settings in the ISDN Timers dialog unless you are
instructed to do so by your Vertical Technical Support representative in order to address a
specific issue.
6 Click
OK to save your changes.
7 Repeat these steps for the other ports on the Quad BRI module.
Release 2.0
September 2010