Installation guide

Configuring digital trunks and channels 5-34
Chapter 5: Configuring Analog and Digital Trunks
Wave Global Administrator Guide
2 Click Apply to save your changes.
3 Click
Done to return to the Management Console.
Configuring digital channels for ISDN
Note: For information about configuring an ISDN data connection for dial-up, see
“Configuring dial-up routing” on page 21-1. The information in this section also applies to
ISDN PRI.
1 Ensure that the
Enabled check box is selected.
2 Select a
Trunk Group from the drop-down list.
3 Click
Apply to save your changes.
4 Click
Done to return to the Management Console.
Release 2.0
September 2010