Installation guide

Configuring digital trunks and channels 5-33
Chapter 5: Configuring Analog and Digital Trunks
Wave Global Administrator Guide
Configuring digital channels for data
1 Specify the Connection for the selected channels from the drop-down list.
One or more channels can be assigned to a particular data connection. For example, if your
trunk has 12 (13-24) data channels, you can assign the DS0/Mux connection to channels 13
through 24.
Note: Channels assigned to the same digital connection or DS0/Mux trunk group must be
contiguous.
You can select from the following connections to transport data between the Wave Server
and the WAN:
• None
• DS0/Mux
If you are configuring your T-1 trunk to be a T-1/DS0 multiplexor, choose the T-1
DS0/Mux connection for the channels you want to multiplex. You must also assign
the same number of channels to T-1DS0/Mux on the other T-1 port.
Note: When a channel is set to T-1/DS0 Mux, the trunk is automatically enabled.
Release 2.0
September 2010