Installation guide

Configuring digital trunks and channels 5-32
Chapter 5: Configuring Analog and Digital Trunks
Wave Global Administrator Guide
5 Specify the Trunk Group for the selected channels.
One or more channels can be assigned to a particular voice trunk group. For example, if
your trunk has 12 (1-12) 2-way voice channels, you can assign the Digital trunk group to
channels 1 through 12.
Note: Trunk groups can be named in any way you like. You might want to rename your
trunk groups to be more meaningful to you (see the Hint in “About creating new trunk
groups” on page 5-2).
Warning: If the trunk group you select is a Single Call variant outside line-enabled
trunk group and you had previously selected more than one channel in step 2 of
“Configuring digital channels” on page 5-29, you will see an error message similar
to the following. Click OK to clear the message, and go back and select a single
channel:
6 Click Apply to save your changes.
7 Click
Done to return to the Management Console.
Release 2.0
September 2010